Posts Tagged ‘Furnace Installation’

Groton Furnace Pointers: Fuel Types

Monday, January 9th, 2012

In most cases, you’ll have a choice concerning what type of fuel you’d like your Groton home’s furnace to burn. For most people, this choice comes down to propane, oil or natural gas. The one you choose could significantly impact the cost of heating your home for many years to come, but it’s usually a pretty clear cut decision.

One thing to remember is that most furnaces that burn natural gas can also burn propane. If you don’t yet have a propane tank but are considering getting one, you might not have to make a final decision just yet. Although it’s generally better to set up your furnace for one type of fuel and then leave it that way, you will likely still have the option of converting later on if you should choose to.

If you do have access to natural gas, though, that’s probably going to be your best option. Furnaces that burn natural gas or propane are generally much more efficient than any other type of furnace on the market. You can get them with annual fuel utilization efficiency (AFUE) ratings as low as 80% and as high as 97+%, so that ensures that you’ll be able to find the one to fit your specific situation.

If you’re facing particularly harsh and frigid winters, you’ll want to choose the most energy efficient option available to you and that’s pretty much always going to be a natural gas furnace. Of course, when you’re looking to decide between natural gas and propane as a fuel source, you’ll just want to compare the relative cost for each in your area. For some people natural gas is cheaper, while it’s propane for others. And since your furnace will operate at the same efficiency no matter which of these fuels you choose, you just need to choose the cheapest.

Oil is certainly an option as well, but if you’re looking for a very high efficiency furnace, you’re not going to find one that burns oil. That doesn’t mean that an oil burning furnace might not be a good investment for you. If you don’t have access to natural gas in your area and your heating load isn’t that high, oil might be a perfectly economical choice for you.

If you do opt for a super high efficiency furnace, but don’t have access to natural gas lines, propane is probably the way to go as opposed to oil.

Tags: , , , , , ,
Posted in Heating | Comments Off

What Size Furnace is Right for My Home? A Question from Bolton

Friday, November 11th, 2011

When it comes to your Bolton home’s heating equipment, the right size is very important.  An incorrectly sized furnace may result in many cold spots in your home, an overworked furnace, or higher utility bills.

An undersized furnace will turn off and on frequently, which is called short cycling. Short cycling can lead to moisture in the system, causing less efficiency and damage to equipment from accumulating moisture in the heating system. The constant cycling adds to wear and tear on equipment, too. An oversized furnace may not be able to keep up with the demand for heat during the coldest days. The furnace may be constantly running and unable to keep up – adding to higher utility costs. So size really does matter when it comes to selecting the right heating equipment for your home.

But a big furnace does not mean it is right-sized. Have you ever seen a “five-way” gravity furnace? It was manufactured in the mid-1900’s and took up a lot of room – as much as half of a basement – while being extremely inefficient. The key here is efficiency. A furnace that works right is sized to the space it is heating, which does not include attics, crawlspaces, or uninsulated rooms (porches, mud rooms, etc.).

A furnace must make efficient use of its Btu’s, which is abbreviated for British thermal unit. Btu is used to measure a furnace size. Furnaces are often rated by input Btu, which is the amount of energy consumed when running. The output Btu may be different based on the system. And output Btu is the best way to select a furnace, since this is the actual heating capacity.

When sizing a furnace, the first thing to do is to determine the inside space that will be heated. If you are looking to heat your home, you can measure the square footage of each room (multiply width by length). The rooms should include bathrooms and hallways but exclude attics and crawlspaces. Add up the totals and match up the Btu output to the total square footage. If you aren’t sure of your calculations, call a qualified heating and cooling contractor.

There are many factors that go into heating a home and today’s energy efficient furnaces give homeowners many more choices. Whatever furnace you choose to purchase, make sure you do your homework and hire a qualified professional HVAC contractor to determine the best size furnace for your home.

Tags: , , , , , ,
Posted in Heating | Comments Off